Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »


What operating systems are supported?

 Windows 7Windows VistaWindows XP
HiCAD 2012 (32 Bit)
HiCAD 2011  (32 Bit)
HiCAD 2010                   

Please note:

  • If you use the Windows Firewall, exceptions for certain ports may be required to enable the utilisation of the Hardlock Server or the Softlock Server License. Click here to read what steps are required for this.
  • If network licences are used, the following operating systems can be used for the licence server: Windows XP, Windows Vista, Windows Server 2003, Windows Server 2008.  

What are the system and hardware requirements?

You can use any hardware provided with current drivers for the installed operating system. Please note, that for example the graphics drivers supports the complete open-GL command set.

Recommended minimum Hardware Requirements for HiCAD 2012, HiCAD 2011 und HiCAD 2010 (SP 1 / SP2):

  • Pentium 4-compliance with SSE2 support
  • 2 GB RAM
  • approx. 3 GB free disk space
  • DVD drive
  • fully OpenGL 2.0-capable graphics board with 128 MB RAM or more. You can use the OpenGLCapabilityTester  to check whether the OpenGL capabilities of your computer are sufficient for HiCAD.
  • Screen resolution 1280x1024
  • Microsoft Windows 7, Vista (HiCAD 2010) or XP (HiCAD 2011 only 32 Bit) - each with latest service pack and security patches

To achieve optimal performance for large assemblies, the system should possess significantly more main memory than is considered sufficient for HiCAD at first glance. This enables the hard disk accessing operations Buffer memory, Undo and Switch drawing  to be performed up to 4 times faster

Attention

  • Internet access is required on the computers or servers on which the licenses are managed!
  • If you have a 64 Bit version of HiCAD/HELiOS, the hardlock can no longer be used as license file selector due to missing driver support!

 

Optimum Hardware Equipment HiCAD 2012, HiCAD 2011 and HiCAD 2010 (February 2012):

ComputerFujitsu Celsius M470
Processor (CPU)Intel® Xeon® Processor W3550 (8M Cache, 3.06 GHz, 4.80 GT/s Intel® QPI)
Main memory16 GB, DDR3-RAM, 1333 MHz
Hard disk1 SATA II disk (disk: Windows), 1 SSD SATA disk, 128 GB, 2.5 Inch (disk: HiCAD)
Graphics boardNVIDIA Quadro 5000 (2.5 GB)
Screen resolutionFull HD (1920x1080)
Operating system

Microsoft Windows 7 (64 Bit)

 

Appropriate database system for HELiOS utilisation:

  • HiCAD/HELiOS 2011: Microsoft SQL-Server 2000 / 2005 / 2008 oder Oracle Database Server 10g / 11g R2
  • HiCAD/HELiOS 2010: Microsoft SQL-Server 2000 / 2005 / 2008 oder Oracle Database Server 10g / 11g R2

What graphics board should be used?

The following graphics boards are recommended for HiCAD. Please note that insufficient graphics hardware will impair the performance and the quality of graphical representation.

Tested with operating system: Windows 7 Enterprise 64-bit

Tested with HiCAD-Version: 1701 

ManufacturerModel Driver1680 x 10502560 x 1600
Nvidia

 

 

NVIDIA Quadro 2000 (1 GB GDDR5)

8.17.12.9670 (296.70)

NVIDIA Quadro 4000 (2 GB GDDR5)

8.17.12.9670 (296.70)

NVIDIA Quadro 5000 (2.5 GB GDDR5)

8.17.12.9670 (296.70)
AMD

FirePro V3900 (1 GB DDR3)

8.911.3.3000

FirePro V5900 (2 GB GDDR5, 512 Stream Proc.)8.911.3.3000
FirePro V7900 (2 GB GDDR5, 1280 Stream Proc.)8.911.3.3000not yet tested


* The higher the benchmark value, the better the performance

 

General test conditions for graphic boards:

  • Resolution 1280x1024 Pixel
  • One-screen configuration
  • Install current DirectX Version before installing the graphic card driver.
  • Deactivate vertical Sync. in the Open GL Settings.
  • Set Direct 3D to highest performance.
  • Deactivate Fog emulation  

 What are the hardware requirements for the Vault Server?

 

Processor (CPU):

Pentium III-compatible processor, Minimum: 1 GHz

RAM:

1 GB, Recommended 4 GB or more

Graphics:

VGA  (no special requirements)

Hard disk:

For software: 100 MB

For user data: Depending on the amount of data to be expected, plus backup memory of >= 100%

(distribution over several volumes/drives possible, redundant array of independent disks (RAID) for primary user data recommended)

Operating system
(virtual servers also possible):

Windows XP SP3 Professional
Windows XP SP2 x64 Professional

Windows 7 Professional
Windows 7 x64 Professional

Windows Server 2003 SP2
Windows Server 2003 SP2 x64

Windows Server 2003 R2 SP2
Windows Server 2003 R2 SP2 x64

Windows Server 2008 SP2
Windows Server 2008 SP2 x64

Windows Server 2008 R2 x64

 

 

  • No labels